snack pellet extruder machine-manufacture,factory,supplier from China

Twin screw extruder is developed on the basis of single screw extruder. Two screws are placed side by side in the barrel of the twin screw extruder. According to the meshing degree of the two screws can be divided into mutual meshing type and non-meshing type. According to the rotation direction of the two screw shafts, it can be divided into reverse rotation type and co-rotation type.(1) meshing twin screw: Because the meshing gap of the meshing screw is very small, the material has the ability of forced conveying, not easy to produce backflow, leakage phenomenon.

　　The 3D pellet production line developed by our company mainly uses potato starch, Corn starch, etc. as raw materials to produce the popular secondary puffed food in the market with different shapes, such as pea crisps, shells, spirals, square tubes, round tubes, waves, etc. This production line has a unique process, reasonable configuration, high degree of automation, stable performance, and no need to configure a boiler.

The screw extruder was first used in the plastics industry, and its theoretical research started earlier, forming a variety of mathematical models used to describe the basic principles of flow and heat transfer in the extrusion process, using these models to achieve accurate extrusion machine simulation Design. The application of extrusion technology in the food industry is slightly later than that in the plastics industry, which is mainly due to the complexity of food raw materials.

Puffed snack food is a kind of brittle food with delicate taste and rich taste. With the improvement of Chinese living standard and the change of consumption concept, all kinds of grain puffed food as a convenient, quick, nutritious leisure small snack, quickly enter many households. Leisure food production line has many optional models, flexible equipment configuration, a wide range of raw materials, a wide range of product types, simple operation and so on.

For extruder equipment, the model specifications of extruder equipment are classified according to the diameter of the screw. For the sake of explanation, plastic is used as an example below, but the same is true for food extruders.That is to say, the screw diameter of the extruder equipment is the model specification of the extruder equipment. For example, the screw diameter of the 90-type extruder equipment is 90mm.

Feed extruder is a single screw extruder. Mainly used for food puffing, livestock feed or used for puffing single raw materials, but also as a plant oil and drinking wine production of raw materials in the pre-place. Twin-screw extruding extruder, mainly used for the production and processing of high-grade aquatic products, pet materials, especially the processing of viscous materials.What are its characteristics?1.

Series double screw extruder introduction:1, mainly by the feeding system, extrusion system, rotary cutting system, heating system, lubrication system, control system.2, extruder feeding system, main drive system, rotary cutting system all adopt frequency control, strong power, smooth operation, power saving.3, automatic lubrication, forced cooling, to ensure the safe operation of the extruder and prolong the life.4, screw alloy material, through special processing, high strength, wear resistance, increase the service life.5, according to different products, with different structure and length

When operating a twin-screw extruder, it should be maintained on time. The maintenance process is carried out after the twin-screw extruder runs continuously for 2500-5000h and shuts down. The screw is extracted to inspect, measure and identify the wear condition of the most critical components, replace the components that have reached the specified wear limit as soon as possible, and repair the damaged components . The maintenance standard of the reducer of the twin-screw extruder is the same as that of the ordinary standard reducer.

The extruder has the functions of compression, mixing, kneading, melting, puffing and molding. The cavity of the extruder can be divided into 3-5 zones. Each zone can be heated by steam or electricity, or by extrusion friction, so as to achieve the purpose of cooking the material. Under the action of high temperature and high pressure in the cavity, the starch Gelatinization, protein denaturation. When the material passes through each zone of the extruder cavity, soluble flavor substances and pigments can be injected into the material through the cavity under high pressure.

　　The puff snack extruder has two pairs of screws that mesh with each other and rotate in the same direction. They jointly play the roles of conveying, friction extrusion and heating. The materials are input by the principle of positive displacement for forced conveying, and pressure backflow is rarely formed.　　Thus, the problem in this respect on the single screw extrusion extruder is better solved, and strong conveying. puff snake extruder integrates compression, mixing, mixing, shearing, melting, sterilization, expansion, molding and other functions, and is completed in a very short time.